Home > Knowledge > Content

Main points of application and maintenance of tundish and three major parts

Aug 02, 2022

4. Immersion nozzle

     (1) The preparation requirements before the installation of the immersion nozzle refer to the long nozzle.

     (2) When preparing to install, first check whether the baking equipment is normal, whether the argon blowing pipe is leaking, and the mechanism equipment is in a normal state.

     (3) When installing the immersion nozzle, pay special attention to the direction of the discharge hole. It cannot be installed in the wrong place, and must be installed in a fixed position, and check whether it is vertical to prevent the deviation of the discharge hole.

     (4) Baking requirements for immersion nozzles (see temperature curve diagram).


Send Inquiry