Home > Knowledge > Content

The effect of aluminum hydroxide flame retardant on humidity

May 04, 2022

Aluminum hydroxide flame retardant is a kind of flame retardant based on aluminum hydroxide, which has strong flame retardant performance. Therefore, its appearance can basically prevent the further spread of fire and effectively protect safety. Many users pay close attention to their effects, because their effects have a great influence on humidity.

1. Generally, flame retardant is required to be no less than a certain value. If the flame retardant value is too low, the leakage current along the wire and cable line will inevitably increase, resulting in waste of electric energy, and at the same time, the electric energy becomes heat energy, which prepares the conditions for thermal breakdown and increases the possibility of thermal breakdown.

2. In the flame retardant of DC cables, aluminum hydroxide flame retardant can also be composed of materials with different resistivities to increase the utilization rate of the materials. Increasing the surface resistivity is also very important for the flame retardant of the cable. When there is dirt and moisture, due to its uneven distribution, part of the surface may be subjected to higher voltage, which may cause partial discharge or creeping discharge, causing serious failure.

3. Use artificial methods to reduce the surface resistance, such as the conductive core of the cable, because the surface is not completely smooth and the electric field is unevenly distributed. The high electric field strength will cause corona discharge. The surface of the conductive core is covered with conductive rubber or semiconducting. After plastic, the electric field intensity on the surface of the core will be reduced to eliminate corona. The moisture content of the material can be judged according to the change of the resistivity of the flame-retardant material.

4. Due to the small electrical conductivity, the size of the water molecules of the aluminum hydroxide flame retardant is much smaller than that of the polymer. Under the action of heat, the polymer macromolecules and the composed chain links move relatively, and the water molecules can easily penetrate In the polymer, the conductive ions in the polymer increase, and the flame retardancy is reduced.

From the above, it can be seen that the effect of aluminum hydroxide flame retardant on humidity is different. The flame retardant value is different, and the effect reflected is naturally not the same. We should correctly recognize the effect of effects on humidity. Use them wisely.


Send Inquiry